|
|
 |
|
| |
|
| | 激光系列产品 >> 光学调整架 >> 光学微调架 K 100，kinematic |
|
|
| Mirror Mount K 100, kinematic |
| |
K 100 |
 |
|
| |
The kinematic mirror mount K 100 is delivered for circular mirrors in three sizes, 4“, 5“, and 6“. The mirror holder is intended to retain the mirror directly. The two-point support plate with two steel pins ensures a definied position of the mirror in the mount and a good repeatability, too. A plastic bolt clamp the mirror with low forces.
The mirror mount K 100 is available with fine-thread screws or micrometers, like the other mounts, too.
The centre heights of the K 100 are chosen so that all versions are SYS 90 compatible (4” on RT 90 slide, 5“ and 6“ on base plate FP 70 x 70 x 15).
Motorization on request.
＆#8226; for use with SYS 90
＆#8226; tow-point support plate with hardened steel pins
＆#8226; deformation-resistant aluminium, black anodized
ways of installing:
- - for use with SYS 90 direct on slide RT 90-110 with thread adapter M8-M6
- - on optical table with base plate FP 65x65x10 or FP 70x70x15 mm
- - on pin with pin adapter
| | |
 |
|
| |
Part No. |
Type Designation |
Product Type |
3D PDF |
|
| |
26.110.1001 |
K 100-D100-FGS |
kinematic mirror mount K 100, ø 4", with fine adjustment screws |
 3D-PDF.zip |
|
| |
26.110.1002 |
K 100-D100-MS |
kinematic mirror mount K 100, ø 4“, with micrometers |
3D-PDF.zip |
|
| |
26.110.1251 |
K 100-D125-FGS |
kinematic mirror mount K 100, ø 5“, with fine adjustment screws |
3D-PDF.zip |
|
| |
26.110.1252 |
K 100-D125-MS |
kinematic mirror mount K 100, ø 5“, with micrometers |
3D-PDF.zip |
|
| |
26.110.1501 |
K 100-D150-FGS |
kinematic mirror mount K 100, ø 6“, with fine adjustment screws |
3D-PDF.zip |
|
| |
26.110.1502 |
K 100-D150-MS |
kinematic mirror mount K 100, ø 6“, with micrometers |
3D-PDF.zip |
| |
|
| 点击数：455 录入时间：2009-5-12 【打印此页】 【返回】 |
 |
|
| |
| |
|
