|
|
 |
|
| |
|
| | 激光系列产品 >> 光学微调架 >> 光学微调架TRANS 80 |
|
|
| Transmitting Mount TRANS 80 |
| |
TRANS 80 |
 |
|
| |
The TRANS 80 is supplied for mounted optics with 56 mm outside diameter, or 2“ unmounted. At extra cost it can be supplied for mounted or unmounted elements up to 65 mm diameter.
There are several possible ways of installing it:
＆#8226; without a base plate, using the central M8 tapped hole, or the two M6 tapped holes ＆#8226; on the standard tapped hole grid via a base plate
Displacement in X and Y planes and rotation by means of slots; centre heights 60 mm or 65 mm
＆#8226; in SYS 90 using a 15 mm base plate on slide 90, 80 mm wide; slotted adjustment for transverse setting, centre height 105 mm
＆#8226; for use with SYS 90
＆#8226; fine adjustment screws or micrometers
＆#8226; theta-phi adjustment
| | |
 |
|
| |
Part No. |
Type Designation |
Product Type |
3D PDF |
3D Model |
| |
26.208.0561 |
TRANS 80-D56-FGS |
transmitting mount TRANS 80 with fine adjustment screws, ø 56 mm, for mounted optics |
— |
— |
| |
26.208.0562 |
TRANS 80-D56-MS |
transmitting mount TRANS 80 with micrometers, ø 56 mm, for mounted optics |
— |
— |
| |
26.208.1501 |
TRANS 80U-D51-FGS |
transmitting mount TRANS 80 with fine adjustment screws, ø 2“, for unmounted optics |
— |
— |
| |
26.208.1502 |
TRANS 80U-D51-MS |
transmitting mount TRANS 80 with micrometers, ø 2“, for unmounted optics |
 3D-PDF.zip |
| |
|
| 点击数：3064 录入时间：2009/5/12 【打印此页】 【返回】 |
 |
|
| |
| |
|
